Navistar International NAVKAL PRO ECM Programming Software, CF-53 Toughbook w/ Nexiq USB-Link 2 Adapter - Preloaded & Ready to Use!
NAVKAL PRO FUNCTIONS/CAPABILITIES:
- Calibration Updating
- On Screen Vehicle Information Display
- ECM Software Version & Upgrade Available
- Read & Clear Diagnostic Trouble Codes (DTC)
- Original Equipment Manufacturer (OEM) Controlled Parameter Updates
- Blank Module Programming
License Information:
- Purchase includes a 1 Year subscription to NAVKAL PRO. Each year the license needs to be re-purchased.
- This is the same software used in International / Navistar Dealerships.
- Software Download link and activation codes will be sent in an email.
- NAVKAL PRO can reflash a used replacement ECM as long as the ECM part # and revision # are the same. Call International Parts to get your original ECM part # and revsion #. The new calibration is included with Navkal Pro for free. The replacement ecm can be new or used, both can be re-programmed. The used ECM may have an unforeseen problem, so it may not take the re-flash of the calibration.
Minimum System Requirements:
- Windows 7 or Higher
- 1GHz Intel Core 2 Duo, AMD Athlon X2 or better
- 2GB (32-bit) or 4GB (64-bit) of RAM
- 300MB of available hard disk space
- 1024 x 768 resolution monitor
- One or more RP1210A compatible communication devices with SAE J1708 and/or SAE J1939 support
Recommended Adapters:
- NEXIQ™ Technologies – USB-Link2 (Wired Connectivity) (Included)
- Dearborn Group Technologies – DPA 5
- Noregon® Systems, Inc. – DLA+, DLA+ Wireless
NOTE: Please refer to each manufacturer’s website for additional information.
* Programming changes not supported outside of the Navistar Dealer Network *
- Emission Changes Involving Emissions Label Replacements
- Horsepower Upgrades
- Engine/Exhaust Brake Additions
- Engine Replacement Programming
- Component Serial Number Updates
Navistar® Engine Diagnostics (2007 - 2018) is a diagnostic and programming service tool for Navistar® Engines. A full-featured PC application, Navistar Engine Diagnostics is designed to meet the wide range of diagnostic challenges of servicing a mixed truck fleet. Coverage includes all J1939 International electronic engine systems. It allows you to monitor the control system, retrieve diagnostic trouble codes (DTC), change parameters, view and graph engine data, and run specialized service bay testing on all engine and aftertreatment systems. The application also features period updates, ensuring you the most up-to-date coverage.
License Information:
- Purchase includes a 1 Year subscription to Navistar Engine Diagnostics. Each year the license needs to be re-purchased.
- This is the same software used in International / Navistar dealerships. The only functionality that is off-limits (password protected by International / Navistar) is max-horsepower adjustments and ECU reprogramming.
- This license does not provide fault finding or test information.
- CPU reprogramming can not be accomplished with this software. NAVKAL Pro is used for CPU reprogramming, it is sold separately.
- Software Download link and activation codes will be sent in an email.
Software Capabilities:
- Control System Monitoring
- View
- Record
- Save
- Playing Snapshot Recordings
- Diagnostic Trouble Codes
- Retrieve, View, Clear
- HD-OBD Freeze Frame Data
- HD-OBD Monitors
- Monitor Results
- Diagnostic Readiness
- Monitor Performance Ratio
- View, Save Print
- Service Bay Tests
- Key On, Engine Off
- Actuator Tests
- Sensor Intermittent Faults
- Cold Start Test
- Engine Running
- Air Management Test
- Cylinder Cutout Test
- Engine Fan Test (If Equip)
- High Pressure Pump Test
- Aftertreatment System Tests
- Procedures
- Sensor Calibrating
- Part Replacement Resets
- Programmable Parameters
- Engine Feature settings
- View Programming
- Change Programming
- Service Interval Reset
NOTE: Navistar Engine Diagnostics + NAVKAL PRO ECM Software is registered to the end user and is not returnable!
PLEASE NOTE: NEXIQ HAS REMOVED THEIR 6-PIN ADAPTER FROM THEIR KIT
Includes:
- USB Link
- 15 ft. USB cable
- Quick Start reference Guide
- 9-PIN & OBD-II Adapter
- Drivers are downloaded from NEXIQ's website
API Support:
Protocol Coverage:
- 3 CAN - J1939/CAN125/CAN250/CAN500/CAN1000
- Automatic bit rate detection for all standard CAN channels
- Single Wire CAN
- Fault Tolerant CAN
- J1587/J1708
- J1850
- ISO 15765 (Diagnostic CAN)
- ISO 14230 (KWP2000 over ISO9141)
- J2534
- ALDL
- ATEC 160 (160 baud)
Features:
- RP1210A, RP1210B, RP1210C and J2534 API support
- Easy USB connectivity using Laptop USB Port
- Wired Connectivity - No Bluetooth/Wireless
The NEXIQ USB-Link 2 will communicate with the following OEM Programs:
- Detroit Diesel Diagnostic Link
- CAT Electronic Technician (On-Highway only)
- Cummins Insite Lite / Pro
- International - ServiceMAXX Fleet Pro
- Hino eXplorer
- Volvo PTT
- VCAD Elite Mack/Volvo
- V-MAC Service Tools
- Allison DOC® For PC-Service Tool - Protocols Supported: J1939, J1708/J1587, and J1850
- Allison DOC® For Fleets (1000/2000) - Protocols Supported: J1939, J1850
- Allison DOC® For Fleets (3000/4000) - Protocols Supported: J1939, J1708/J1587
- Navistar Engine Diagnostics (NED) (Pre-Installed)
- NavKal Pro ECM (Pre-Installed)
- Eaton ServiceRanger
- Bendix ACom
- WABCO Toolbox
- Freightliner ServiceLink
- International ABS
- International DLB
- International Intune
- International IPC v2.02
Refurbished Panasonic Toughbook CF-53, Win10, 2.7GHz, 8GB RAM, 500GB SSD:
- Intel Processor i5
- Windows 10
- 8GB RAM
- 500GB Solid State Drive (SSD)
- Touchpad with Multi Touch
- 14″ High Definition 720p LED 1366 x 768
- Anti-reflective and anti-glare screen treatments
- Drop and Spill-resistant
- Wifi Comes Standard
- Battery & Charger Included
A GOOGLE AD IS SHOWN BELOW-IT IS NOT ASSOCIATED WITH THE PRODUCT ABOVE
