Specifications

• Voltage DC
  
  • Maximum voltage: 1000 V
  • Accuracy: ±(0.2%+2)
  • Maximum resolution: 0.001 V
• Voltage AC
  
  • Maximum voltage: 1000 V
  • Accuracy: ±(2%+3)
  • Maximum resolution: 0.1 mV
• Current DC
  
  • Maximum amps: 400 mA
  • Amps accuracy: ±(1.0%+2)
  • Maximum resolution: 0.01 mA
• Current AC
  
  • Maximum amps: 400 mA
  • Amps accuracy: ±(2.0%+2)*
  • Maximum resolution: 0.01 mA
• Resistance
  
  • Maximum resistance: 50 MΩ
  • Accuracy: ±(1.2%+2)
  • maximum resolution: 0.1Ω

Insulation Test

• Minimum test current @ 1kΩ/V: 1 mA
• Test voltages: 500, 1000 V
• Maximum resistance per test voltage:
  
  • 50 V
  • 100 V
  • 250 V
  • 500 V
  • 1000 V 600 MΩ
• Maximum resolution per test voltage:
  
  • 50 V 0.01 MΩ
  • 100 V 0.01 MΩ
  • 250 V 0.1 MΩ
  • 500 V 0.1 MΩ
  • 1000 V 0.1 MΩ
• Accuracy per test voltage:
  
  • 50 V: ±(3% + 5)
  • 100 V: ±(3% + 5)
  • 250 V: ±(1.5% + 5)
  • 500 V: ±(2.0% + 5)
  • 1000 V: ±(2.0% + 5)

Environmental Specifications

• Operating temperature: –20°C to +55°C
• Storage temperature: -40°C to +60°C
• Humidity (without condensation):
  
  • 0% - 95% (10°C – 30°C)
  • 0% - 75% (30°C – 40°C)
  • 0% - 40% (40°C – 55°C)
• Operating altitude: 2000 m

Safety Specifications

• General: IEC 61010-1: Pollution Degree 2
• Measurement: IEC 61010-2-033: CAT IV 600V / CAT III 1000V
• Mechanical and General Specifications
• Size: 203 x 100 x 50 mm (with holster)
• Weight: 624 g
• Warranty: 3 years (manufacturer)
• Battery life alkaline - Meter use: 1000 hours
• Insulation test use: Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.
• IP rating: IP40