Since the start of production the Chrysler A604 transaxle has received many major engineering design changes. This Update Handbook will explain the purpose of each change, the parts that are affected by the change, and any parts interchangeability problems created by the change. Electronic operation and diagnosis.
A must have for the A604 / 41TE technician.
Index:
- New 4 Ring Stator
- New Overdrive / Reverse Lip Seals
- New Parking Guide Bracket and Parking Pawl
- Transaxle Controllers
- Bell Housing Identification and Turbine Shafts
- New 4 Disc Overdrive Clutch Pack
- New PRNODL and Neutral Switches
- New Overall Gear Ratios
- New Transfer Shaft
- New Transfer Gears
- OD / Reverse Piston Change No. 1
- OD / Reverse Piston Change No. 2
- New Input Clutch Hub and "O" Rings
- New Cooler By-Pass Valve Assembly
- Failure Due to Lack of Lube
- Valve Body Changes
- New P.R. Valve and Spacer Plate
- Revised Sound Cover and Solenoid Plate
- Revised Low / Reverse Piston Seals
- Revised 2-4 Clutch Piston Retainer
- 2-4 and Low Reverse Clutch Assembly Process
- Input Clutch Drum Snap Ring Identification
- Fault Code Identification Chart
- Checkball Location Changes for 1995
- New Transaxle Ranger Sensors (TRS)
- New 2-4 Reaction Plate Tapered Snap Ring
- New Solenoid Pack
- New Design Final Drive Cross Shaft Retainers
- Gear Ratio Identification for 1989 Through 2002
You may also be interested in:
|
|
|
A GOOGLE AD IS SHOWN BELOW-IT IS NOT ASSOCIATED WITH THE PRODUCT ABOVE
